RVMIC5 V2: How To Set Up & Use

The Rockville RV Mic 5 V2 is a versatile and adjustable microphone stand, ideal for live performances, recording sessions, and rehearsals. This guide will walk you through the process of setting it up, attaching a microphone, and organizing cables. The RV Mic 5 V2 also includes a tablet or smartphone holder, making it a great choice for artists who want to keep their devices handy while performing or recording.

Step-by-Step Instructions:

A. Set Up the Mic Stand Legs

1. Loosen the Base Knob:
   • Start by loosening the knob at the base of the stand.
   • This will allow you to bring the base down to the bottom of the stand.
2. Set the Stand Legs:
   • Lift each of the three legs to the upright position.
   • Once the legs are in place, tighten the base knob to lock the legs securely.

B. Adjust the Height of the Stand

• Use the grip located in the middle of the stand.
• Turn the grip to the left to loosen it, then pull up on the top of the stand to adjust the height.
• Once you’ve reached your desired height, tighten the grip to lock it in place.

C. Attach and Adjust the Boom Arm

1. Set the Angle:
   • Loosen the knob on top of the stand to adjust the angle of the boom arm.
   • Once you have it positioned how you like, tighten the knob to secure the angle.
2. Extend the Boom Arm:
   • Use the two knobs located on the boom arm to adjust its reach. 
     • Loosen the first knob to adjust the position of the boom arm.
     • Loosen the second knob to extend the boom arm for more reach.
   • Once you have it set, tighten the knobs to lock the arm in place.

D. Attach the Microphone Clip

1. Attach the Mic Clip:
   • The RV Mic 5 V2 comes with a mic clip for dynamic microphones.
   • Line up the threading on the clip with the threading at the top of the boom arm.
   • Twist the clip onto the boom arm to secure it.
2. Switch to a Different Mic Clip (Optional):
   • If you have a 38 threading mic clip, unscrew the existing threading on the boom arm to reveal a 38 threading that fits other clips or adapters.

E. Set Up the Condenser Microphone

1. Attach the Shock Mount:
   • For condenser microphones, you can use a shock mount.
   • Line up the threading on the shock mount with the threading at the top of the boom arm.
   • Adjust the angle of the shock mount by loosening the knob on the mount and tightening it once in the desired position.
2. Insert the Condenser Microphone:
   • Open the clamps on the shock mount, place the condenser microphone inside, and release the clamps to secure it.

3. Optional: Attach a Pop Filter:

   • For added protection against plosives (like P's and T's), attach a pop filter to the mic stand. Loosen the clamp, position it where you want, and tighten it securely.

    

F. Attach the Cable Clips & Organize the Microphone Cable

• Use the built-in cable management clips on the stand to keep the microphone cable organized.
• Run the cable along the stand and use the clips to secure it at both the top and bottom of the stand for a neat setup.

G. Attach a Smartphone or Tablet

1. Using the Smartphone/Tablet Holder:
   • The RV Mic 5 V2 comes with a smartphone/tablet holder.
   • Attach the holder to the boom arm by lining up the threading at the bottom of the holder with the threading on top of the boom arm and screw it on.
2. Adjusting the Holder:
   • Loosen the knob on the holder to adjust the angle of your phone or tablet.
   • For more flexibility, loosen the side knob to adjust the ball joint and tighten it once the desired position is set.
3. Using the C-Clamp Mount (Alternative Option):
   • Attach the C-clamp mount to the mic stand by loosening the clamp, securing it to the stand, and tightening it back up.
   • Then attach the smartphone/tablet holder to the mount in the same way as above.

H. Transport and Storage

1. Break Down the Mic Stand: 
   • To store or transport the mic stand, reverse the setup steps. Loosen the knobs and arms to collapse the stand.
2. Pack Into the Travel Bag: 
   • Place the collapsed stand into the included travel bag, along with any accessories such as the mic clip, smartphone holder, and C-clamp mount.
   • Close the bag and use the handles to easily carry your setup to your next gig or recording session.

Conclusion:

The Rockville RV Mic 5 V2 Microphone Stand offers a flexible, sturdy solution for both dynamic and condenser microphones, with additional features like a smartphone or tablet holder. Whether you're performing live or recording in a studio, setting up this mic stand is quick and easy, with plenty of options for customization. From adjusting the height and angle of the boom arm to keeping your cables organized, this stand is designed to meet your needs.