RVMIC5 V2: How To Set Up A Dynamic Mic

Introduction

In this guide, we will walk you through the easy steps to set up a dynamic microphone on your Rockville  RVMIC5 V2 microphone stand. This setup is ideal for live performances, ensuring you have a stable and flexible microphone arrangement. The  RVMIC5 V2 stand is highly adjustable, offering the ability to control the angle, height, and reach of the microphone. Plus, it features convenient cable management for a clean, organized setup.

Step-by-Step Instructions

Step 1: Attach the Mic Clip to the Boom Arm

1. Prepare the Mic Clip:
   • Take the included mic clip and align the threading at the bottom of the clip with the threading on top of the boom arm.
   • Twist the mic clip onto the boom arm until it’s securely attached.
2. Threading Sizes:
   • The  RVMIC5 V2 boom arm has a 5/8" threading, which is compatible with the included mic clip.
   • If you have a 3/8" threaded mic clip, simply unscrew the 5/8" threading to reveal the 3/8" threading underneath, which will fit smaller clips.

Step 2: Attach the Dynamic Microphone to the Mic Clip

1. Place the Microphone:
   • Slip your dynamic microphone into the mic clip.
   • Ensure the microphone is securely held in place by the clip, allowing it to be positioned properly for use.

Step 3: Organize the Mic Cable Using Cable Management Clips

1. Plug the Cable Into the Microphone:
   • Insert one end of your microphone cable into the microphone.
2. Organize the Cable:
   • Run the cable along the mic stand, using the cable management clips to keep it neat and tidy.
   • Place one clip near the top of the boom arm and the second clip towards the bottom of the stand.
3. Adjust the Clips:
   • Move the clips as needed to ensure that the cable is organized, and there is no excess slack that could get tangled.

Step 4: Adjust the Stand for Optimal Performance

1. Adjust the Angle:
   • Use the knob on top of the stand to loosen and adjust the angle of the microphone to your desired position.
2. Adjust the Reach:
   • Use the knobs along the boom arm to adjust the reach of the stand. Pull the boom arm outwards for more reach or move it back for a shorter distance.
3. Adjust the Height:
   • Use the grip in the middle of the stand to adjust its height. Loosen the grip, adjust the height, and then tighten it to lock it in place.

Conclusion

Setting up your dynamic microphone with the Rockville  RVMIC5 V2 is quick and simple. By attaching the mic clip, organizing the mic cable with built-in cable management clips, and adjusting the stand’s height and angle, you can create a clean, efficient, and flexible setup for any live performance.