RVMIC5 V2: How To Set Up w/ An ISOBOX

Introduction

In this guide, we will walk you through the steps to set up an ISO box with your Rockville RVMIC5 V2 to enhance your recording setup. Whether you choose to attach the ISO box directly to the mic stand or the boom arm, this guide will show you how to securely set it up for optimal performance.

Step-by-Step Instructions

Option 1: Attaching the ISO Box to the Mic Stand

1. Unscrew the Boom Arm:
   • To begin, unscrew the boom arm by twisting it to the left. Once loosened, you can easily remove it.
2. Expose the Threading:
   • After removing the boom arm, you will see the threading at the top of the mic stand.
3. Attach the ISO Box Attachment Piece:
   • Before attaching the ISO box, ensure that you have the attachment piece that comes with the ISO box. This piece allows you to securely connect the ISO box to the mic stand.
   • Take the attachment piece and screw it onto the exposed threading at the top of the mic stand.
4. Position the ISO Box:
   • Line up the hole at the bottom of the ISO box with the threading on top of the stand.
   • Open the door of the ISO box.
5. Secure the ISO Box:
   • Take the attachment piece and screw it into the threading at the top of the mic stand.
   • The ISO box is now securely attached.
6. Insert Your Microphone:
   • Now, you can place your condenser microphone inside the ISO box.
   • If needed, refer to additional videos on setting up the ISO box for further assistance.

Option 2: Attaching the ISO Box to the Boom Arm

1. Unscrew the Boom Arm from the Stand:
   • If you prefer, you can set up the ISO box on the boom arm instead.
   • First, remove the boom arm from the mic stand as shown in the previous steps.
2. Attach the ISO Box to the Boom Arm:
   • Line up the ISO box with the threading on top of the boom arm.
   • Use the attachment piece and secure the ISO box to the boom arm in the same way you attached it to the mic stand.

Conclusion

Attaching an ISO box to your Rockville RVMIC5 V2 can greatly improve your recording setup by providing isolation and reducing unwanted noise. Whether you mount the ISO box on the mic stand or boom arm, the process is simple and effective. For more details on setting up your condenser microphone inside the ISO box, check out additional tutorials available from Rockville.