RVMIC5 V2: How To Set Up A Phone or Tablet

Introduction

In this guide, we will walk you through the steps of setting up your smartphone or tablet with the Rockville RVMIC5 V2 mic stand. This versatile stand includes a smartphone/tablet holder and a C-clamp mount, giving you multiple options to keep your phone or tablet handy during performances or recording sessions.

Step-by-Step Instructions

Step 1: Attach the Smartphone/Tablet Holder to the Boom Arm

1. Prepare the Holder:
   • Take the smartphone or tablet holder and align the threading at the bottom of the holder with the threading at the top of the boom arm.
2. Screw It On:
   • Twist the holder onto the boom arm until it is secure.
3. Adjust the Angle:
   • Once attached, you can easily change the angle of the holder to fit your preference. For added flexibility, loosen the knob on the side of the holder, which will loosen the ball joints, giving you even more angle adjustment.
4. Lock the Position:
   • Once you have the angle set, tighten the knob to lock the holder into place.
5. Stretch the Holder Arms:
   • The holder arms can extend to accommodate a variety of devices. Stretch them out to securely fit your smartphone or tablet.

Step 2: Use the C-Clamp Mount for Additional Flexibility

1. Loosen the Clamp:
   • Loosen the C-clamp mount to create enough space to attach it to your mic stand.
2. Choose the Position:
   • Select a position on your mic stand that allows the smartphone/tablet holder to be placed where you want it. For example, you can place it close to the mic for easy access.
3. Attach the Mount:
   • Line up the clamp and tighten it to secure the mount on the mic stand.
4. Adjust the Angle:
   • Use the knob on the side of the mount to adjust the angle of the holder. This allows you to move your device closer or further away depending on your setup needs.
5. Lock the Position:
   • Once the angle is set to your liking, tighten the knob to lock it in place.

Step 3: Place Your Smartphone or Tablet on the Holder

1. Attach the Holder:
   • With the mount securely in place, take your smartphone or tablet holder and line it up with the threading on the C-clamp mount.
2. Secure the Device:
   • Twist and tighten the holder onto the mount to secure it.
3. Insert Your Device:
   • Place your smartphone or tablet into the holder, and it’s ready for use. You can now read lyrics, speeches, or use your device as a teleprompter while performing or speaking into the mic.

Conclusion

Setting up your smartphone or tablet with the Rockville RVMIC5 V2 is quick and easy, providing you with a flexible setup for any live performance or recording session. By using the smartphone/tablet holder or the C-clamp mount, you can have your device right where you need it while keeping the mic stand clean and organized.