BPA10: How To Set Up & Use

Introduction:

This guide walks you through setting up and using your Rockville BPA10 powered speaker. You'll learn how to connect microphones, instruments, audio sources, additional speakers, and subwoofers, as well as basic troubleshooting tips. These simple instructions are suitable even if you have no technical background.

Included Items:

• Rockville BPA10 Powered Speaker
• Wireless Remote Control
• Power Cable

Optional Items:

• XLR cables (for microphones, additional speakers, or subwoofers)
• Quarter-inch cables (for instruments)
• Microphone
• Subwoofer
• Speaker stand with mounting bracket (optional)
• Bluetooth-enabled device (smartphone/tablet)

Step-by-Step Setup Instructions:

Step 1: Mounting the BPA10 on a Speaker Stand

1. Loosen the knob on the bottom of your BPA10.
2. Place the speaker onto the pole of the speaker stand.
3. Tighten the knob securely to hold the speaker firmly in place.

Step 2: Powering Your Speaker

1. Connect the included power cable:
   • Plug the female end into the back of your BPA10 speaker.
   • Plug the other end into an available wall power outlet.
2. Flip the power switch on the back to turn the speaker on.

Connecting Microphones and Instruments:

Connecting a Microphone:

1. Take an XLR cable and plug it into your microphone.
2. Plug the other end into the Line/Mic Input on your BPA10.
3. Press down on the Mic/Line button to activate microphone mode.
4. Adjust the volume using the Volume 1 knob.

Adjusting EQ Settings:

• On the rear panel, use the Bass and Treble knobs to customize your sound:
  • Treble: Adjust for more presence (higher frequencies) or warmth.
  • Bass: Adjust low-frequency response to preference.

Step 3: Connecting an Instrument

• To connect instruments like guitars or keyboards:
  1. Use a quarter-inch cable from your instrument’s output to the Line Input on the speaker.
  2. Ensure the Mic/Line button is pressed out (Line mode).
  3. Raise the Volume 1 knob to desired sound levels.

Step 3: Connecting Audio Sources

The BPA10 supports multiple audio sources:

• Bluetooth: Pair wirelessly to smartphones/tablets.
• SD Card and USB Input: Insert media directly to play MP3 files.
• RCA Line Input and 1/8-inch AUX input: For wired audio playback.

Controlling Volume by Input:

• MP3 Volume knob: Adjust volume for Bluetooth, SD card, and USB inputs.
• Volume 2 knob: Adjust volume for AUX and RCA inputs.

Step 3a: Connecting via Bluetooth:

1. Press the Mode button to select Bluetooth mode.
2. Pair your smartphone or tablet to the speaker by selecting "BPA10" from your device’s Bluetooth menu.
3. Once paired, play audio directly from your connected device.

Step 4: Connecting Two BPA10 Speakers Together

To link two BPA10 speakers:

1. Connect an XLR cable from the Line Output of your primary BPA10 speaker to the Line Input of your secondary BPA10 speaker.
2. On the secondary speaker, set the Mic/Line button to Line (pressed out).
3. Adjust the Volume 1 knob on the secondary speaker.

Step 3b: Adding a Subwoofer

To connect a subwoofer to your BPA10:

1. Take an XLR cable, plug the female end into the Line Output on your BPA10 speaker.
2. Connect the other end into the Line Input of your subwoofer.
3. Adjust volume levels on the subwoofer and the BPA10 speaker.

Expanded Setup (Two Speakers + Subwoofer):

• Connect the first BPA10 to a second BPA10, then connect the second speaker to your subwoofer following the steps above.

Step 4: Karaoke Setup

The BPA10 is great for karaoke:

1. Connect your microphone as described above (Mic mode, Volume 1 knob up).
2. Pair your tablet or smartphone to the speaker using Bluetooth mode.
3. Open the YouTube app or another karaoke app and select your desired karaoke song.
4. Start singing along with the music.

Troubleshooting & FAQs:

Q: My microphone isn't producing sound.

• Ensure the Mic/Line switch is pressed down (Mic mode), and the Volume 1 knob is raised.

Q: Bluetooth audio isn’t connecting.

• Ensure your device’s Bluetooth is activated and the BPA10 appears in your Bluetooth devices. Reconnect if necessary.

Q: My speaker isn’t powering on.

• Double-check all connections, and ensure the power cable is securely plugged into the speaker and the wall outlet.

Conclusion:

Setting up your Rockville BPA10 powered speaker for standalone use or expanded setups with additional speakers and subwoofers is easy and versatile. With these simple steps, you can achieve professional-quality sound for live performances, rehearsals, parties, or karaoke.