BPA10: How To Set Up For Live Performance

Introduction

This guide provides clear, step-by-step instructions on using your Rockville BPA10 speaker for live performances, whether you're performing solo with a microphone and instrument or setting up multiple speakers with a mixer for larger events or rehearsals. No advanced technical skills required!

Items Needed:

• Rockville BPA10 Speaker(s)
• Microphone with XLR cable
• Musical instrument (e.g., guitar, keyboard) with ¼-inch cable
• Audio mixer (optional for multi-speaker setups)
• Additional speakers or subwoofers (optional)
• XLR cables (for connecting multiple devices)

Step-by-Step Instructions

Step 1: Connecting a Microphone to the BPA10

1. Plug your microphone cable (XLR) into your microphone.
2. Plug the other end into the Mic Input on the back of the BPA10.
3. Press the Mic/Line button inward to activate Mic Mode.
4. Turn on your microphone.
5. Adjust the Volume 1 knob to test the microphone:
   • Speak into the mic ("Check, one, two"). Your voice should now be audible through the speaker.

Step 2: Connecting an Instrument (Guitar or Keyboard)

1. Connect a ¼-inch instrument cable to your instrument (e.g., guitar or keyboard).
2. Connect the other end into the Line Input (¼-inch) on the BPA10.
3. Press the Mic/Line button outward to activate Line Mode.
4. Adjust your instrument’s volume and raise the Volume 1 knob on the BPA10 to the desired level.
5. Play your instrument to confirm audio is clearly audible through the speaker.

Step 3: Using Multiple BPA10 Speakers with a Mixer

For larger setups, such as band rehearsals or performances, use a mixer to connect multiple speakers:

1. Connect XLR cables from the Main XLR Outputs on your mixer to the Line Inputs on your BPA10 speakers.
2. Ensure each BPA10 is set to Line Mode (Mic/Line button outward).
3. Raise the Volume 1 knobs on each BPA10 to a suitable level.
4. Adjust the Main Mix knob on your mixer to set overall volume output.

• To test your setup, you can connect a device (e.g., smartphone via Bluetooth) to your mixer and play audio.

Step 4: Expanding Your System (Connecting Additional Speakers or Subwoofers)

You can easily expand your sound system by linking additional speakers or subwoofers:

1. Plug an XLR cable into the Line Output on the BPA10 speaker.
2. Connect the other end into the input of another powered speaker or subwoofer.
3. Adjust volume levels accordingly on each connected device.

Troubleshooting & FAQs

Q: My microphone or instrument isn't audible through the BPA10.

• Verify the correct mode (Mic or Line) is selected on the back of the speaker.
• Double-check all cable connections and volume levels.

Q: I'm experiencing feedback or noise.

• Lower the microphone or instrument volume slightly.
• Adjust speaker positioning and keep microphones pointed away from speakers.

Conclusion

You're now ready to use your Rockville BPA10 speaker system for professional-quality live performances. Adjust settings and connections to suit your specific setup and venue. For additional visual guidance, watch our video tutorial.