BPA10: How To Connect w/ a Mixer

Introduction:

In this guide, you'll learn how to connect two Rockville BPA10 powered speakers to a mixer. This setup is ideal for live performances, band rehearsals, parties, and other events. Follow these simple steps even if you have no technical experience.

Requirements:

• Two Rockville BPA10 Powered Speakers
• Audio Mixer with XLR Outputs
• Two XLR Cables
• Optional: Additional speakers or subwoofers for expanded setups

Step-by-Step Instructions:

Step 1: Connecting Your Speakers to the Mixer

1. Prepare your XLR cables:
   • Take two XLR cables, and identify the male and female ends.
2. Connect to Speakers:
   • Plug the male ends of each XLR cable into the Line Input on the back of each BPA10 speaker.
3. Connect to Mixer:
   • Plug the female ends of the XLR cables into the Main XLR Outputs of your mixer.

Step 2: Configuring Your BPA10 Speakers

1. On the back panel of each speaker, locate the Line/Mic button.
2. Ensure the button is set to Line Mode (button pressed out).
3. Adjust the Volume 1 knobs on each speaker to your desired listening level.

Step 3: Adjusting Mixer Settings

1. Turn up the Main Mix Knob on your mixer.
2. If you’re connecting a device like a phone, you can do this via Bluetooth (if your mixer supports it) or another input method.

Step 4: Testing Your Setup

• Play audio through your mixer to test:
  • Ensure sound clearly comes from both speakers.
  • Adjust mixer and speaker volume controls as needed.

Expanding Your Setup:

You can connect additional powered speakers or subwoofers:

• Connect another XLR cable from the Line Output of the BPA10 speaker to the Line Input of an additional speaker or subwoofer.

Troubleshooting & FAQs:

Q: Why am I not hearing any sound from my speakers?

• Ensure the Line/Mic switch is set to Line (button pressed out).
• Verify all cables are securely connected.
• Check that the mixer’s Main Mix Knob and speakers’ volume knobs are turned up.

Q: Can I connect additional speakers to this setup?

• Yes. Use the Line Output on the BPA10 speakers to link additional speakers or subs.

Conclusion:

Setting up two Rockville BPA10 powered speakers to a mixer is straightforward and enhances your audio experience for various live events and performances. For a visual demonstration, please watch the accompanying setup video.