BD20: How To Mount

Introduction

The Rockville BD20 light fixture can be mounted onto a truss for stage, DJ, or event lighting setups. This guide will walk you through the mounting process using a lighting clamp, specifically the Rockville LC70 Lighting Clamp.

Step 1: Identifying the Mounting Bracket

• On top of the BD20, you’ll find a mounting bracket designed for truss installation.
• You’ll need a lighting clamp, such as the LC70, to secure the light to your truss.

Step 2: Attaching the Lighting Clamp

1. Unscrew the bolt from the bottom of the LC70 lighting clamp.
2. Insert the bolt through the middle hole of the BB20’s mounting bracket.
3. Reattach the clamp by screwing it back onto the bolt until secure.

Step 3: Mounting the Light to a Truss

1. Loosen the butterfly screw on the clamp to create an opening.
2. Choose a mounting spot on your truss and position the clamp.
3. Tighten the butterfly screw until the light is securely mounted.

Step 4: Adjusting the Angle

• Use the side knobs on the BD20’s bracket to tilt and position the light at your desired angle.
• Secure the knobs once you've set the optimal direction for your lighting setup.

Step 5: Setting Up the Light

Once mounted, you can:

• Use built-in functions for various lighting effects.
• Connect via wireless DMX for remote control.
• Set up Master-Slave mode for synchronized lighting effects.

Conclusion

Mounting your Rockville BD20 is quick and easy with the LC70 lighting clamp. Whether you're setting up for a DJ event, concert, or stage production, following these steps ensures a secure and adjustable installation.