BD20: How To Use The Remote

Introduction

The wireless remote for your Rockville BD20 lights allows you to control various functions such as power, sound activation, auto modes, strobe effects, and DMX settings. This guide will walk you through each button's function to help you get the most out of your lighting setup.

Understanding the Wireless Remote Controls

1. Power Button

• Turns the bulbs on or off, but does not power the entire unit down.

2. Up and Down Buttons (Menu Navigation)

• Used for cycling through different menu settings on your light.

3. Sound Mode Button

• Activates Sound Mode, allowing lights to react to music.
• Adjust sensitivity using the up and down buttons below.

4. Auto Mode Button

• Cycles through three built-in auto programs:
  • Press once → Auto 1
  • Press twice → Auto 2
  • Press three times → Auto 3

5. Manual Mode Button

• Enables Manual Mode, allowing direct selection of colors and effects.

6. Color Selection Buttons

• Use the up and down buttons to cycle through different colors in manual mode.

7. Strobe Control

• Adjusts strobe effects using the up and down buttons.

8. Motor Speed Control

• Changes the motor speed of the light’s movement using the up and down buttons.

9. DMX Address Buttons

• Two DMX buttons allow you to cycle between different DMX addresses when integrating the BD20 lights into a DMX-controlled setup.

Conclusion

Using the wireless remote with your Rockville BD20 lights makes it easy to adjust settings on the fly. Whether you're setting up a sound-reactive light show, cycling through auto modes, or fine-tuning the strobe effect, this remote offers simple control over your lighting setup.