BD20: Inputs, Outputs, Controls & Effects

Introduction

The Rockville BD20 light features multiple inputs, outputs, and controls that allow for flexible operation, whether using it as a standalone fixture, linking it with other lights, or integrating it into a DMX-controlled setup. This guide will explain each connection and function to help you set up and operate your BD20 light efficiently.

Power Controls & Charging

1. Power Switch

• Located on the back of the unit to turn the light on or off.

2. Power In Socket

• Used to charge the built-in battery with the included power cable.
• Plug the female end of the cable into the Power In socket and the other end into a wall outlet.

3. Power Out Socket (Daisy Chaining Power)

• Allows you to electrically daisy chain multiple lights, so they can charge simultaneously.
• Connect a power cable from the Power Out socket of one light to the Power In socket of another.

4. Battery Status Light

• Located on the back of the unit to indicate battery life.

DMX Connectivity

5. DMX In Port

• Used to connect a DMX signal from an external source, such as:
  • DMX Controller
  • Master Light

6. DMX Out Port

• Used to send DMX signals to another BD20 light, allowing for daisy-chaining of DMX control.

7. Wireless DMX Feature

• On/Off switch for enabling wireless DMX.
• Allows you to connect the BD20 light to:
  • A wireless DMX controller
  • Another BD20 light using a wireless DMX signal

Light Controls & Navigation

8. Menu Button

• Used to switch between different modes on the BD20 light.

9. Up and Down Buttons

• Allows you to cycle through different settings and submenus.

10. Enter Button

• Used to select a mode or save changes in the settings menu.

Conclusion

The Rockville BD20 offers a variety of power, control, and connectivity options, making it an adaptable lighting solution. Whether using wired DMX, wireless DMX, or standalone modes, these features ensure seamless integration into your setup.