TITAN COLUMN 12: How To Set Up & Use

Introduction:
Setting up your Rockville Titan Column 12 is quick and easy! In this guide, we’ll show you how to assemble the system, connect your devices, and use its features for a seamless sound experience. The Titan Column 12 includes everything you need to create a great setup, including the column speaker, subwoofer, speaker stand, and cables.

Requirements:

• Rockville Titan Column 12 system
• XLR cable (for microphone)
• Instrument cable (for guitar or keyboard)
• Power cable
• Speaker cable
• Small bag for storing components
• Subwoofer cover

Step-by-Step Instructions:

1. Unbox the Titan Column 12

• Inside the included small bag, you’ll find the following components:
  • Column speaker (top part)
  • Stand to connect the column speaker to the subwoofer
  • Power cable
  • Speaker cable
• The subwoofer, which houses the mixer and inputs/outputs, is wrapped in a cover.

2. Assemble the Titan Column 12

• Attach the Column Speaker to the Stand:
  • Line up the screw hole on the bottom of the column speaker with the screw on the stand.
  • Twist the stand into the column speaker until it’s secure.
• Attach the Stand to the Subwoofer:
  • Line up the other end of the stand to the screw hole on the subwoofer.
  • Twist it to secure the stand to the subwoofer.

3. Adjust the Stand Height

• Use the top knob to adjust the height of the column speaker.
• Loosen the top knob, raise the column to the desired height, and insert the safety pin into the appropriate hole to lock it in place.
• Tighten the top knob to secure it.
• If you need more height, you can use the bottom knob to adjust further.

4. Connect the Column Speaker to the Subwoofer

• Use the included speaker cable:
  • Plug one end into the column speaker, aligning the ridges and twisting to lock it in place.
  • Plug the other end into the subwoofer’s port, twist to lock it.

5. Power Up the System

• Plug the power cable into the subwoofer and then into your power source or wall outlet.
• Turn on the system, and you're all set to use the Titan Column 12.

Using the Titan Column 12 Features

1. Mixer and DSP Controls on the Subwoofer

• The subwoofer has a built-in mixer and DSP for sound customization.
• Mode Button: Switch the input source (e.g., Bluetooth, USB) and engage True Wireless Stereo (TWS) mode for two Titan Column 12 systems.
• Playback Controls: Pause, play, stop, repeat, and skip buttons for music.
• DSP Modes: Use the DSP mode knob to switch between Normal, DJ, Voice, Live, or Flat EQ presets. You can hear the difference by cycling through the settings while playing music.

2. Line Inputs

• The subwoofer features combo Jack inputs (XLR or 1/4-inch) for external devices like powered speakers or mixers.
• Use the line level knob to control the external signal volume.

3. Connecting a Microphone, Guitar, or Line-Level Instrument

• Microphone Setup:
  • Plug an XLR cable into the microphone and the microphone input on the subwoofer.
  • Press the button above the input for microphone mode and adjust the volume.
  • Test the mic by speaking into it.
• Guitar Setup:
  • Use a 1/4-inch instrument cable to connect your guitar to the line input.
  • Press the button above the input for guitar mode, then adjust the volume for your guitar.
• Line-Level Instrument Setup:
  • For instruments like keyboards, connect them to the line input and make sure the button is pressed out for line mode.

4. Using Both Microphone and Instrument Simultaneously

• Plug the microphone into the mic input and set it to microphone mode.
• Plug the guitar or keyboard into the line input, ensuring the line level knob is raised to the appropriate level.
• Adjust the microphone and instrument volumes as needed.

Setting Up for Karaoke

1. Set Up the Microphone for Karaoke

• Plug your microphone into the mic input and set it to microphone mode.
• Adjust the microphone volume so you can hear it through the speakers.

2. Set Up Bluetooth for Music

• Press the mode button on the speaker until it reads “Bluetooth unconnected.”
• Pair your tablet or smartphone by enabling Bluetooth and searching for "Titan Column 12."
• Raise the MP3 volume knob to hear music from your device.

3. Play Karaoke Tracks

• Open a karaoke app like YouTube, search for a song with lyrics, and start playing.
• Ensure the volume on your device is high, and adjust the DSP settings if needed.

4. Link Two Titan Column 12 Systems via TWS

• Set both speakers to Bluetooth mode, ensuring no devices are connected.
• Hold the mode button on the main speaker to activate TWS.
• Pair the main speaker with your device. The second speaker will automatically connect via TWS.

Breaking Down the Titan Column 12

1. Power Down the System

• Turn off the Titan Column 12 and unplug the power cable.

2. Disconnect the Speaker Cable

• Twist and pull out the silver piece on each end of the speaker cable.

3. Disassemble the Column Speaker and Stand

• Loosen the top knob and retract the pole to the desired position.
• Disconnect the stand from the subwoofer and column speaker.

4. Store the Components

• Place the column speaker in the larger compartment of the small bag.
• Use the Velcro straps to secure the pole in the smaller compartment along with cables.
• Use the carry straps or shoulder strap to transport the bag.
• Place the subwoofer cover on and use the handles for easy transportation.

Conclusion:
Assembling and breaking down your Rockville Titan Column 12 is quick and straightforward. With its versatile inputs, Bluetooth compatibility, and customizable DSP settings, it’s perfect for live sound, karaoke, and music playback.