TITAN COLUMN 12: Mixer & DSP Breakdown

Introduction:

This article will guide you through using the mixer and DSP (Digital Sound Processor) section on the Rockville Titan Column 12 speaker system. Whether you're a beginner or a seasoned audio enthusiast, these instructions are designed to be simple and easy to follow.

Step-by-Step Instructions

1. Locate the Mixer and DSP Section

• The mixer and DSP are located on the back panel of the Titan Column 12's subwoofer.

2. Understanding the Mode and Playback Buttons

• Mode Button:
  • Use this to switch between multiple input sources.
  • Also activates TWS (True Wireless Stereo) mode if you have two Titan Column 12 units.
• Playback Controls:
  • Play/Pause – Starts or pauses playback.
  • Stop – Stops the track.
  • Repeat – Repeats the current track.
  • Previous/Next – Navigate between tracks.

3. Using the USB/SD Card Inputs

• Insert a USB drive or SD card to play stored audio files directly from these sources.

4. Adjusting DSP Settings

• Use the DSP Mode Knob to select from preset sound modes:
  • Normal
  • DJ
  • Voice
  • Live
  • Flat

Each setting is optimized for different applications. Test them out by playing music and rotating the knob to hear the differences.

5. Connecting External Sources (Line Inputs)

• Input Options:
  • RCA Line Input
  • Combo XLR/¼” Input (accepts both XLR and ¼” cables)
• Use Case:
  • Connect external audio gear like a mixer, DJ controller, or another speaker.
• Line Level Knob:
  • Controls the volume of the external source.
  • Also adjusts volume for Bluetooth and USB/SD playback.

6. Using the XLR Mix Output

• Connect to another powered speaker or a mixer using the XLR Mix Output.
• This sends the mixed signal from the Titan Column 12 to your next device.

7. Mic/Guitar/Instrument Input Setup

• Combo Input Jack: Accepts XLR or ¼” cables for microphones, guitars, or keyboards.
• Mic/Guitar Selector Button:
  • Pressed in = Mic/Guitar Mode
  • Pressed out = Line Level Mode (for instruments like keyboards)
• Level Control Knob: Adjusts volume for this input channel.

Troubleshooting & FAQs

Q: Why isn’t my Bluetooth or USB audio playing through the speaker?

• Make sure you’ve selected the correct source using the Mode Button.
• Check the Line Level knob – it also controls Bluetooth/USB volume.

Q: Can I use the speaker for both live vocals and music playback simultaneously?

• Yes. Just connect your mic to the Mic/Guitar input and your playback device (Bluetooth, USB, or line input), then balance the levels using their respective knobs.

Q: I hear distortion from my guitar – what should I do?

• Ensure the Mic/Guitar button is pressed in for guitar input.
• Adjust the Level knob to reduce gain and avoid clipping.

Conclusion

With just a few easy steps, you can unlock the full potential of your Rockville Titan Column 12's mixer and DSP section. Whether you're mixing a live set, playing music from a USB drive, or connecting instruments, this system gives you versatile control.