TITAN COLUMN 12: How To Assemble & Dissemble

Introduction:
This guide will walk you through the process of assembling and breaking down your Rockville Titan Column 12 speaker system. Whether you’re setting it up for a performance or packing it away for transport, these easy-to-follow steps ensure a quick and secure setup and breakdown.

Requirements:

• Rockville Titan Column 12
• Speaker stand
• Column speaker
• Subwoofer
• Speaker cable
• Power cable
• Small storage bag (for components)

Assembling the Titan Column 12

1. Attach the Stand to the Column Speaker

• Start by taking the speaker stand and the column speaker.
• Line up the screw hole on the bottom of the column speaker with the corresponding screw on the top of the stand.
• Secure the stand to the column speaker by twisting it clockwise.

2. Attach the Stand to the Subwoofer

• Now, take the other end of the stand and align it with the screw hole on the top of the subwoofer.
• Twist it clockwise to securely attach the stand to the subwoofer.

3. Adjust the Stand Height

• Use the top knob on the stand to adjust the height of the column speaker.
• Loosen the top knob, lift the column speaker, and align it with the desired hole.
• Insert the safety pin into the hole to lock the height in place.
• Tighten the top knob to secure the position.

4. Connect the Speaker Cable

• Take the included speaker cable and connect one end to the column speaker by aligning the ridges with the port and twisting to lock it in place.
• Repeat the same process to connect the other end to the subwoofer.

5. Plug in the Power Cable

• Insert the power cable into the subwoofer and connect the other end to your power source or wall outlet.
• Turn on the system, and your Titan Column 12 is ready to use.

Breaking Down the Titan Column 12

1. Turn Off and Unplug the System

• Begin by turning off the system and unplugging the power cable from the wall outlet.

2. Disconnect the Speaker Cable

• Start by disconnecting the speaker cable from the column speaker.
• Pull on the silver piece, twist it to the left, and then pull the cable out.
• Repeat the process for the other end of the speaker cable, disconnecting it from the subwoofer.

3. Detach the Column Speaker from the Stand

• Loosen the knob at the base of the pole, twist it to the left, and pull up to disconnect the speaker pole from the base.
• To disconnect the column speaker from the pole, loosen the knob at the top of the stand and lift the speaker off.

4. Retract the Pole

• Loosen the top knob to bring the top pole down.
• Tighten the knob to lock the pole in place.
• If you extended the pole further, be sure to retract the bottom section by loosening the second knob and bringing it down.

5. Pack the Components into the Storage Bag

• Place the column speaker on its side and insert it into the larger compartment of the bag.
• Place the pole into the smaller compartment and secure it with the velcro straps.
• Add the cables on top of the pole in the smaller compartment.

6. Close the Bag and Prepare for Transport

• Close up the bag and use the smaller straps or the long adjustable shoulder strap to carry it comfortably.

7. Cover the Subwoofer

• To pack the subwoofer, line up the holes in the cover with the subwoofer’s handles.
• Place the cover on the sub and use the handles to easily transport the subwoofer.

Conclusion:
Assembling and breaking down your Rockville Titan Column 12 is quick and straightforward, ensuring a hassle-free setup and transport. With the included storage bag and adjustable straps, carrying your Titan Column 12 to your next event is easy and convenient.