TITAN COLUMN 12: How To Link via TWS

Introduction:
Linking two Rockville Titan Column 12s together for true wireless stereo (TWS) is an easy and fun way to amplify your sound, allowing both speakers to play music simultaneously. In this guide, we’ll walk you through the simple process of connecting two Titan Column 12s using TWS, and we’ll also cover an alternative method using the line input for connection.

Requirements:

• Two Rockville Titan Column 12 speakers
• Bluetooth-enabled device (smartphone or tablet)

Step-by-Step Instructions:

1. Set Both Speakers to Bluetooth Mode

• Make sure both Titan Column 12 speakers are set to Bluetooth mode.
• Press the mode button on both speakers until the LED display reads "Bluetooth unconnected" (indicating the speaker is searching for a device to pair with).

2. Choose the Main Speaker

• Decide which of the two speakers you want to use as the main speaker.
• Hold the mode button on the main speaker to activate TWS (True Wireless Stereo) mode.
• The main speaker’s display will show "TWS," and the other speaker’s display will read "Bluetooth TWS connected."

3. Connect Your Device to the Main Speaker

• On your smartphone or tablet, turn on Bluetooth and search for the "Titan Column 12" in the Bluetooth settings.
• Select "Titan Column 12" to pair it with the main speaker. Once paired, your smartphone will display "Connected," and the main speaker’s display will confirm the connection.

4. Test the Sound

• Make sure the MP3 volume knob on both speakers is raised to an audible level.
• Set the volume on your smartphone or tablet almost all the way up.
• Play some music, and you should hear the sound coming from both Titan Column 12 speakers simultaneously. The TWS connection allows both speakers to sync and play music at the same time.

5. Alternative Method: Using the Mix Out for Connection

• If you don’t want to use TWS, you can connect the two speakers using the mix-out and line-input.
• Take an XLR cable and plug the female end into the mix-out port on the main speaker.
• Plug the other end of the cable into the line input on the second speaker.
• Raise the line level knob on the second speaker to ensure the signal from the first speaker is heard.
• Pair your music source to the main speaker, and both speakers will play the same audio.

Conclusion:

Linking two Titan Column 12 speakers together is easy and adds a powerful sound boost, whether using the TWS connection for wireless stereo or connecting via the line input for a wired setup. Either way, you can enjoy a big sound in multiple areas.