4 Pack MINI RF4: How To Set Up

Introduction:

This guide will walk you through the simple and flexible setup process for the Rockville Mini RF4 4-Pack Wash Lights. Whether you're using them in black or chrome, the steps are exactly the same. We’ll cover how to organize your case, charge your lights, and control them using a wireless DMX controller, master/slave mode, or by grouping them using color groups. No technical experience needed—just follow along step by step.

What’s Included:

• 4 Mini RF4 Wash Lights (Black or Chrome)
• 4 Wireless Remotes
• 4 Chargers
• Protective carry case with adjustable dividers and dual-handle Velcro strap

Step-by-Step Instructions

1. Organize and Transport Your Lights

• Open the case to reveal neatly sectioned compartments.
• Rearrange or remove Velcro dividers to suit your setup needs.
• Close the case using the zipper and secure the dual handles using the Velcro strap for easy transport.

2. Using a Wireless DMX Controller

Set Up:

1. Turn on all four lights.
2. Enter Wireless DMX mode:
   • Double press the power button on each light until the Color Group LED flashes quickly twice.
3. Set all lights to the same Color Group (e.g., Red):
   • Press the power button once to cycle through Red, Green, Yellow, or Blue.

Sync the Controller:

4. Set the DMX controller to match the same color group (e.g., Red).
5. Activate Scanner 1 on the controller.

Use the Faders (Channel Functions):

• Fader 1: Master Dimmer (Brightness)
• Fader 2–7: Red, Green, Blue, White, Amber, UV LEDs
• Fader 8: Strobe Speed
• Fader 9: Built-in Modes (based on value range)
• Fader 10: Mode Speed Control

Tip: Use the DMX guide to find which values on Fader 9 trigger specific lighting modes.

3. Using Master/Slave Mode (No DMX Required)

Set the Master Light:

1. Choose one light to act as the Master.
2. Double press the power button until the Color Group LED flashes once.
3. Press the power button once to choose a Color Group (e.g., Red).

Set the Slave Lights:

4. On each remaining light:
   • Double press the power button until the Color Group LED flashes quickly twice.
   • Press once to match the master’s color group.

Sync All Lights:

5. On the Master Light:
   • Double press again to set it to RF mode (solid color LED).
6. On the Remote:
   • Press the RF Group button until the remote LED matches the group color (e.g., Red).
   • Choose a mode or color.
7. Return the Master Light to Master Mode (flashing once) to sync all slave lights.

To change mode/color later:

• Set Master Light to RF → Choose new setting → Return to Master Mode.

4. Using Color Groups for Multiple Light Sets

You can split your lights into groups (e.g., Group A = Red, Group B = Green).

Group Setup:

1. Press the power button on each light once to cycle to the desired Color Group (Red, Green, Yellow, Blue).
2. Match each group’s lights to the same color.

Remote Control:

• Press the RF Group button on your remote to switch control to Red, Green, etc.
• Set mode or color for each group individually.

Universal Control:

• Press the RF Group button until the remote LED turns White to control all lights at once, regardless of their group.

Troubleshooting & FAQs

Q: My lights aren't responding to the DMX controller.

• Make sure all lights and the controller are on the same color group.
• Double check that lights are in Wireless DMX mode (LED flashes quickly twice).

Q: Slave lights aren't following the master.

• Ensure the Master light is in Master Mode (LED flashes once).
• Confirm all slave lights are in Slave Mode (LED flashes quickly twice) and set to the same color group.

Q: I want to control lights in separate zones.

• Use the color grouping feature to assign lights to Red, Green, Yellow, or Blue groups and switch between them using the RF remote.

Conclusion:

Setting up your Rockville Mini RF4 4-Pack is simple and versatile—whether you're using DMX, master/slave control, or grouped lighting zones. You can mix colors, create custom effects, or keep it plug-and-play for quick setups.