Operating Instructions
Display Mode | Value | Description | Submenu Function | |
d001 | d001 – d512 | Set DMX address |
| |
Aut1 | Aut1 – Aut3 | Select one of three built-in modes |
| |
Soud | VoL1 – VoL9 | Sound mode | Press the ENTER button to adjust mic sensitivity. The screen will read VoL1. Press the UP and DOWN buttons to adjust the parameter. Press ENTER or MODE to save and exit. | |
NANU | diNN | 0 – 255 | Master dimmer | From NANU screen, press the ENTER button to cycle through submenus. To adjust a submenu item, press the ENTER button, then press the UP and DOWN buttons to adjust the parameters. Press ENTER or MODE to save and exit. |
StrO | 0 – 255 | Adjust strobe speed, slow to fast | ||
rEd | 0 – 255 | Red dimmer | ||
GrEn | 0 – 255 | Green dimmer | ||
bLuE | 0 – 255 | Blue dimmer | ||
UHIt | 0 – 255 | White dimmer | ||
NOtO | 0 – 255 | Motor rotation speed, slow to fast | ||
Iron/IroF | Iron – Irof | Toggle IR on or off | When on, the unit will be controlled by the remote. When off, the unit will not respond to the remote. | |
Remote Control
Functions
- On/Off: Turns the LEDs on or off. Please note, this button is strictly for the LEDs. The unit will remain on and continue to use battery power. To turn it off, use the power switch on the unit.
- (Brightness): Adjust overall brightness in manual mode only.
- Sound: Sets the unit to sound control mode. Use the blue buttons (a) to adjust the mode’s sensitivity.
- Auto: Sets the unit to auto mode. Press repeatedly to cycle through the 3 available modes.
- Manual: Allows you to cycle through different colors (b), adjust strobe speed (c), and adjust the motor speed (d).
- DMX: Press these buttons to cycle through DMX addresses.
10-Channel Mode
Channel | Function | Value | Description |
1 | Master dimmer | 1 – 255 | Adjust overall brightness |
2 | Strobe | 0 – 1 | No strobe |
2 – 255 | Set strobe speed (slow to fast) | ||
3 | Red | 1 – 255 | Adjust individual color brightness |
4 | Green | 1 – 255 | |
5 | Blue | 1 – 255 | |
6 | White | 1 – 255 | |
7 | Motor movement | 1 – 127 | LED motor position |
128 – 255 | LED motor forward and reverse (slow to fast) | ||
8 | Manual dimming (CH1 – CH7 valid) | 1 – 5 | Adjust function settings |
Green, Blue, White, Red Color Cycle + Movement | 6 – 55 | ||
Green, Blue, White, Red Color Cycle + Movement + Strobe | 56 – 105 | ||
Green, Blue, White, Red Color Cycle + Multi Color + Movement | 106 – 155 | ||
Green, Blue, White, Red Color Cycle + Multi Color + Movement+ Strobe | 156 – 205 | ||
Sound mode | 206 – 255 | ||
9 | Ch8 speed options | 1 – 255 | Ch8 function movement speed |
Comments
0 comments
Please sign in to leave a comment.