BATTERY STRIP 24: How To Set Up Master/Slave Mode

Introduction

The Master-Slave function on the Battery Strip 24 wash lights allows you to synchronize multiple lights without using a DMX controller. This feature is perfect for live performances, DJ setups, and stage productions where you want multiple lights to follow the same settings. This guide will show you how to connect and configure your lights for Master-Slave operation.

What You Need:

• 2 or More Battery Strip 24 Lights (only works with same model)
• DMX Cables (1 for each Slave Light)
• Wireless Remote (optional)

Setup Guide

A.) Connecting the Lights

1. Choose a Master Light – This will control all Slave lights.
2. Connect the the first Slave Light using a DMX cable:
   • Plug the male end of a DMX cable into the DMX Out port on the Master light.
   • Plug the other end into the DMX In port on the first Slave light.
3. Connect additional Slave Lights using DMX cables:
   • Plug another DMX cable into the DMX Out port of the first Slave light.
   • Plug the other end into the DMX In port on another Battery Strip 24 Slave light.
   • Repeat the process as many times as necessary using the DMX Out port on the previously connected Slave light, the DMX In port on another Slave light and another DMX cable.

B.) Setting the Master Light

1. Press the Menu button on the Master light until you see Slnd.
2. Use the Up / Down buttons to select nASt Mode.
3. Press Enter to save.

C.) Setting the Slave Lights

1. Press the Menu button until you see Slnd.
2. Use the Up / Down buttons to select SL 1 or SL 2.
   • Slave Mode 1: Default Synchronization
   • Slave Mode 2: Alternative Sync Option
3. Press Enter to save.

D.) Testing the Master-Slave Setup

1. Set the Master light to a mode or color:
   • Use the buttons on the Master light.
   • Or use the wireless remote to select a color or mode.
2. If everything was set up properly, the Slave lights should follow the Master’s settings.
3. Your Battery Strip 24 lights should now stay synchronized.

Troubleshooting & FAQs

Q: Why aren't the slave lights following the master?

• Double-check that all DMX cables are securely connected.
• Ensure you're connecting the DMX Out port from the Master to the DMX In port on the Slave.
• Make sure the Slave lights are set to SL 1 or SL 2 in the Slnd Menu.
• Make sure the Master light is set to nASt Mode in the Slnd Menu.

Q: Can I mix lights from different Rockville models?

• No. For Master/Slave synchronization, you need to use the same model across the chain.

Q: How many lights can I connect in a Master/Slave chain?

• While there's no fixed limit, practical performance typically supports up to 20 - 30 lights depending on cable quality and power setup.

Conclusion

Setting up Master-Slave mode on your Battery Strip 24 lights is a simple way to control multiple lights without a DMX controller. Whether you’re using it for DJ lighting, concerts, or stage effects, this method ensures consistent and synchronized lighting.