Rockville FLIP PAR 

Battery Par Can Wash Light w/ Wireless DMX + Wifi App

Functions

1. IR Receiver
2. Lenses
3. Flip Light Enclosure

4. LED Display Screen

5. Controls:
   • MENU → Press to switch between modes.
   • UP → Scroll up through values for selected mode.
   • DOWN → Scroll down through values for selected mode.
   • ENTER → Press to access available submenus for the selected mode.
6. Mounting Bracket Attachment Point
7. Wireless 2.4Ghz Antenna 
8. Power Button
9. IEC Power Socket w/ User Serviceable Fuse
10. DMX In and DMX Out Ports
11. Charging Status LED Indicator: 
    • Red = Charging
    • Off = Fully Charged

Remote Control

1. BRIGHTNESS → Adjust overall brightness in any mode. If your light seems dim even after setting the light to the highest brightness level, navigate to the bR menu (page 4) and set it to br4 for maximum brightness.

2. BLACK OUT → Turns the LEDs on/off. The LCD screen will display the word "oFF." Please note, this button is strictly for the LEDs. The unit will remain on and continue to use battery power. To turn it off, use the POWER button on the unit (item 5 on the Functions diagram). Press any button and the unit will return to normal operation.

3. ON → When the unit is in BLACK OUT mode, pressing this button will bring it out of BLACK OUT mode. It will be on the same setting as it was before.

4. WIRELESS GROUP ID UP & DOWN → Use the these buttons to cycle up or down through the 8 available options which are oFF (disables wireless grouping) and wireless groups 1-7.

5. APP GROUP UP & DOWN → Press these buttons to cycle through and assign your light to any one of the four app groups (AP1-AP4). Once the light is assigned to a group, all lights within that group can be controlled via the Rockville Par-Control phone apps (Android and iOS versions). It is available for download from the Google Play store or the Apple app store.

6. SOUND MODES:

   1. Modes 1-4 → Press these buttons to select the desired sound mode; 1 is color cycle sound mode, 2 is color pulse sound mode, 3 is color strobe sound mode, and 4 is color cycle + pulse + strobe sound mode. 

   2.  SENSITIVITY → Use the SENS UP/DOWN buttons to adjust the selected sound mode's sensitivity.

7. SLAVE/DMX:

   1. DMX Menu → Press the SLAVE/DMX button to access the DMX menu. Press it repeatedly to switch between the DMX address screen and DMX channel setting screen. This button is also used in conjuction when setting lights in master/slave and phone app.

   2. SLAVE/DMX UP & DOWN → Use these buttons to make changes to DMX Address or Channel Mode.

8. AUTO MODES:

   1. AUTO MODES → Press to switch between JUMP mode (color cycle change), FADE 01 (color fade change), and FADE 02 (color pulse change).

   2. MODE SPEED→ Use these buttons to set selected mode's speed.

9. STROBE:

   1. Strobe Mode → While in COLOR mode, use the color wheels to select the desired color, then press the STROBE button to set the unit to strobe mode.

   2. STROBE SPEED→ Use these buttons to set the strobe speed. Use the brightness buttons (item 1) to adjust the brightness.

10. COLOR BANK:

    1. Strobe Mode → Press the COLOR BANK button to access the 48 available preset colors.

    2. COLOR ADJUST → Use these buttons to cycle through the colors and select the desired one.

11. COLOR WHEELS → There are six color wheels, each with eight color options. Press any one of the six buttons to select your color, then use the COLOR ADJUST UP/DOWN buttons (item 10b) to cycle through the options for that color. Press the brightness buttons (item 1) to adjust the brightness.

Modes

DMX/SLAVE

This will allow the light to communicate wirelessly with controllers and/or other lights. 

• If not already on the DMX screen, press the MENU button until you see DMX on the top left side of the LED screen.
• When the slave lights connect to the master their Wireless ID will flash, indicating that that are synced.
  

ADD - Address

Here you can set the DMX address and channel mode. 

• The ADD (address) submenu appears first. 
• Use the UP/DOWN buttons to set the DMX address (001 - 512). 
  
• Press the ENTER or MENU buttons to proceed to the next submenu, CH.

CH - Channel

• In the CH (channel) submenu press the UP/DOWN buttons to switch between 6 or 10 channel modes.
  
• Press the MENU button to proceed to the next mode, COLOR.

DMX Controller Functions

When using a DMX controller, use the charts below to reference each channel's function.

6-Channel Mode

10-Channel Mode

Color Mode Menus

Static Colors & Strobe

• From the DMX menu, press the MENU button (twice if the unit is in the ADD submenu) to enter the COLOR menu. 
• Press the ENTER button to switch between the two submenus, SUB and SPEED.
  • Sub: The SUB submenu appears first. Use the UP/DOWN buttons to select one of the 48 preset colors (01 - 48). Press the ENTER or MENU buttons to proceed to the next submenu.
    
     
  • Speed: In the SPEED submenu press the UP/DOWN buttons to set the strobe speed, 00 (off) - 09 (fast). Press the MENU button to proceed to the next mode, JUMP.
    

JUMP - Color Cycle Change

• From the COLOR menu, press the MENU button (twice if the unit is in the SUB submenu) to enter the JUMP menu. In this mode the unit cycles through all colors. 
• Press the UP/DOWN buttons to set the speed, 01 (slow) - 09 (fast). Press the MENU button to proceed to the next mode, FADE.
  

FADE - Color Fade / Pulse Change

• From the JUMP menu, press the MENU button to enter the FADE menu. 
• Press the ENTER button to switch between the two submenus, SUB and SPEED.
  • Sub: The SUB submenu appears first. Use the UP/DOWN buttons to select one of the two settings. SUB 01 will continuously fade from one color to another (color fade). SUB 02 also fades through colors, but fully fades before moving to the next color (color pulse).
    
  • Speed: In the SPEED submenu press the UP/DOWN buttons to set the speed, 01 (slow) - 09 (fast). Press the MENU button to proceed to the next mode, SOUND.
    

SOUND

• From the FADE menu, press the MENU button (twice if the unit is in the SUB submenu) to enter the (sound) menu. 
• Press the ENTER button to switch between the two submenus, SUB and SPEED. 
  • Sub: The SUB submenu appears first.
    
    • Four Sound Modes: Use the UP/DOWN buttons to select one.
      1. Color Cycle Sound Mode → Cycles to a different solid color whenever sound is sensed.
      2. Color Pulse Sound Mode → Pulses to a different color when sound is sensed and if there is no sound or a lull in the sound, the light will fade.
      3. Color Strobe Sound Mode → Strobes a different color when ever sound is sensed.
      4. Color Cycle + Pulse + Strobe Sound Mode → Cycles through the three sound modes.
  • Speed: In the SPEED submenu press the UP/DOWN buttons to set the sensitivity, 01 (least sensitive) to 09 (most sensitive).  Press the MENU button to proceed to the next mode, AP.
    

AP - Phone App

• From the Sound menu, press the MENU button (twice if the unit is in the SUB submenu) to enter the AP - Phone App menu. 
• Use the UP/DOWN buttons to select one of the 4 app groups; AP1, AP2, AP3, or AP4.
  

UID

• While in AP mode, press the ENTER button to see the unit's Unique Identification Number (UID). 
• This is the unit's unique Wifi tag and is used for when synching a light as a master to the app. Each and every unit will have one.

CoL - Custom Color Mixing

• From the AP menu, press the MENU button to enter the CoL (custom color mixing) menu. 
• Press the ENTER button to switch between colors: r (red), G (green), b (blue), u (white), Y (amber), and P (UV), in that order. 
• Use the UP/DOWN buttons to adjust each individual color's brightness, 00 (off, image 1) to 99 (brightest setting, image 2).

• You can adjust an individual color's brightness (image 3) or multiple colors at once. 
  Please note: If you have more than one color "on", it will affect the final color output. For example, if you have red and white on together, the color you see will be a mixture of white and red (image 4). As you add or subtract colors, or adjust the colors' brightness, the hue of the light output will change. Image 4 shows the color output when UV is added to the red and white mix. 

br - Brightness

⚠️If your light seems dim, access this menu and set it to br4 for maximum brightness.

This mode allows you to set the brightness of the light directly from the unit MENU without having to use brightness adjustment buttons on the remote. 

• From the CoL menu, press the MENU button to enter the br (master dimmer) menu. 
• Press the UP/DOWN buttons to select one of the 4 brightness levels: br1, br2, br3, and br4; 1 being the dimmest and 4 the brightest.

dSP (LCD Screen Time Out Setting)

This will determine how long the LCD menu screen will remain on after after no input from the remote or pressing any of the four panel buttons. This feature is especially useful when truss mounting the units. 

• From the br menu, press the MENU button to enter the dSP (LCD screen time out setting) menu.
  
• Press ENTER, then use the UP/DOWN buttons to cycle through and select one of the time settings; on (always on), 10 (screen remains on for 10 seconds), 20 (screen remains on for 20 seconds), 30 (screen remains on for 30 seconds).

Wireless Group ID Settings

This feature is used for wireless DMX controllers/transmitters and master/slave configuration. To sync with a DMX controller or master light with slave light(s), each needs to be in the same Wireless ID grouping. Multiple different groups can run at once. 

• From the dSP menu, press the MENU button to enter the Wireless Group ID settings menu. 
• Use the UP/DOWN buttons to cycle through the wireless frequency settings; off (wireless option is off), 1 (red wireless frequency group), 2 (green wireless frequency group), 3 (yellow wireless frequency group), 4 (blue wireless frequency group), 5 (purple wireless frequency group), 6 (cyan wireless frequency group), 7 (white wireless frequency group).

IR (Remote Control Settings)

• From the wireless frequency settings menu, press the MENU button to enter the IR (Infra Red) menu. 
• Press the UP/DOWN buttons to turn this function on or off. 
  
  • To use the remote select "on" (1). 
  • Select "oFF" to disable the remote control function (2). 
    Please note: When the remote control function is off, you will no longer see the letters "IR" at the top right corner of the display screen when going to other menus.

Master/Slave

• From the wireless group ID settings menu, press the MENU button to enter the MASTER (Master/Slave) menu. 
• Press the UP/DOWN buttons to turn this function on or off. 
  • When set to off, the unit will not send a signal and the word "MASTER" will not be visible on the screen once you leave the Master/Slave mode menu.
    

Master Mode: When Master mode is turned on, the particular unit will control any units that are within the same wireless group ID. This means that all slave units will respond to any commands sent from the master unit.

Slave Mode: When Master mode is turned off, the unit will not send a signal. When placed in a wireless group ID, the slave unit (or units) will respond to any commands received by the master unit (see Master Mode above).
Please note: The slave unit must be in the same wireless group ID as the master unit. Refer to the Wireless Group ID Settings section on the previous page.