TITAN MIX12A: How To Set Up TWS

Introduction:

In this guide, we’ll show you how to set up True Wireless Stereo (TWS) with two TITAN MIX12A speakers, allowing you to play music from both speakers at the same time, wirelessly. This feature is perfect for larger spaces or for creating a more dynamic sound setup without the need for physical connections between the speakers.

Requirements:

• Two TITAN MIX12A speakers
• Bluetooth-enabled device (e.g., computer, smartphone or tablet)

Step-by-Step Instructions:

A.) Activate Bluetooth on Both Speakers

1. Turn on both TITAN MIX12A speakers.
2. On both speakers, press the Bluetooth button to activate Bluetooth mode. The speakers will be ready to link via TWS, and pair with a Bluetooth device once this is done.

B.) Link the Speakers via TWS

The Bluetooth button also doubles as the TWS linking button.

1. On one of the speakers, press and hold the Bluetooth/TWS button for a few seconds.
2. Release the button after a few seconds. You’ll hear a sound, and the Bluetooth light on the other speaker will stay solid, indicating that the speakers are now linked together via TWS.

C.) Connect a Bluetooth Device

1. Open the Bluetooth settings on your smartphone or tablet.
2. Search for the device named TITAN MIX12A in the list of available devices.
3. Select TITAN MIX12A to pair your Bluetooth device with the speakers.
4. Once connected, both speakers will play music simultaneously.

FAQs: 

Q: Can I connect more than two speakers using TWS?

• A: No, TWS can only link two speakers at a time. If you need to link more than two speakers, consider using the XLR Mix Output to connect additional speakers.

Q: How do I adjust the volume once the speakers are linked?

• A: You can control the volume from your Bluetooth device (computer, smartphone or tablet), or adjust the Channel 5/6 volume knobs on each speaker.

Troubleshooting:

• My speakers aren’t linking via TWS. 
  • Ensure that both speakers are in Bluetooth mode and not already connected to a Bluetooth device.
  • Make sure that you’re pressing the Bluetooth button on the first speaker for long enough to activate TWS mode. 
  • The Bluetooth light on the second speaker should stay solid once the speakers are successfully linked.
• One speaker isn’t playing sound. 
  • Ensure both speakers are powered on.
  • Re-enter Bluetooth mode on both units.
  • Hold the Bluetooth/TWS button again on one speaker to re-enable TWS.
• My device won’t connect via Bluetooth.
  • Remove “Titan MIX12A” from your Bluetooth list and re-scan for devices.
  • Make sure the speakers are in Bluetooth mode (flashing lights).
  • Try restarting your phone or tablet before pairing again.
• The speakers disconnect occasionally.
  • Ensure both speakers are within 30 feet (9 meters) of each other and the paired device.
  • Avoid physical obstructions or interference from other wireless devices. 

Conclusion:

You’ve now learned how to set up True Wireless Stereo (TWS) on your Rockville Titan MIX12A speakers.
This setup lets you enjoy a powerful, portable stereo experience without any cables.